Need to add the feature "Alpha Tag"s

MAPIIIAJI · June 20, 2018, 5:55am

It is good idea! You can need to add the “Alpha Tags” function to convert the number to a word! What do you say to Anton about this proposal?

anton · June 26, 2018, 8:00am

What is “Alpha Tags” ? Can you describe more about that.

anton

MAPIIIAJI · June 26, 2018, 8:04am

Alpha tags are a way for you to give your SMS messages a unique ‘sender’ name, which can include digits, text, and some special character

anton · June 26, 2018, 8:07am

You meant “Alphanumeric sender ID” for outgoing SMS ? Its there since ages ago.

anton

MAPIIIAJI · June 26, 2018, 8:11am

Please tell me how to set it up! Thank you, Anton!

anton · June 26, 2018, 8:22am

You need to use gateway that have the ability to use alphanumeric sender ID, gammu can’t do that

anton

MAPIIIAJI · June 26, 2018, 8:28am

With Dev Gateway I can use alphanumeric sender ID and what would you advise? Thank you very much!

Steven_Delport · June 28, 2018, 3:07pm

It works on Kannel please check ton an npi setting with carrier.

MAPIIIAJI · June 28, 2018, 6:29pm

Thanks for the tip, I will study

MAPIIIAJI · August 27, 2018, 5:44am

Hi Steven!
I specify in kannel.conf
source-addr-ton = 5
source-addr-npi = 0
directives in SMSC configuration field.

But can’t specify and not understand how configure carrier. Tell me, please. Thanks in advance.

Steven_Delport · August 27, 2018, 7:27am

Please share the kannel log.

MAPIIIAJI · August 27, 2018, 10:30am

Thanks for you reply Steven!
content of kannel.log:
2018-08-27 13:02:40 [2862] [0] INFO: Added logfile /var/log/kannel/kannel.log’ with level0’.
2018-08-27 13:02:40 [2862] [0] INFO: Started access logfile /var/log/kannel/access.log’. 2018-08-27 13:02:40 [2862] [0] INFO: HTTP: Opening server at port 13000. 2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2018-08-27 13:02:40 [2862] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 2862. 2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2018-08-27 13:02:40 [2862] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 2862. 2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2018-08-27 13:02:40 [2862] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 2862. 2018-08-27 13:02:40 [2862] [2] DEBUG: HTTP: Including port 13000, fd 10 for polling in server thread 2018-08-27 13:02:40 [2862] [0] DEBUG: starting smsbox connection module 2018-08-27 13:02:40 [2862] [0] DEBUG: Adding smsbox routing to id for smsc id 2018-08-27 13:02:40 [2862] [0] DEBUG: Adding smsbox routing to id for smsc id 2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2018-08-27 13:02:40 [2862] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 2862. 2018-08-27 13:02:40 [2862] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 2862. 2018-08-27 13:02:40 [2862] [0] INFO: Set SMS resend frequency to 60 seconds. 2018-08-27 13:02:40 [2862] [0] INFO: SMS resend retry set to unlimited. 2018-08-27 13:02:40 [2862] [0] DEBUG: MO concatenated message handling enabled 2018-08-27 13:02:40 [2862] [0] INFO: DLR rerouting for smsc id disabled. 2018-08-27 13:02:40 [2862] [0] INFO: Added logfile/var/log/kannel/smsc-gsm1.log’ with level 0’. 2018-08-27 13:02:40 [2862] [0] INFO: AT2[gsm1]: configuration shows modemtype 2018-08-27 13:02:40 [2862] [0] DEBUG: AT2[gsm1]: Reading modem definitions from </etc/kannel/kannel.conf> 2018-08-27 13:02:40 [2862] [0] DEBUG: AT2[gsm1]: Found <1> modems in config 2018-08-27 13:02:40 [2862] [0] INFO: AT2[gsm1]: read modem definition for 2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2018-08-27 13:02:40 [2862] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 2862. 2018-08-27 13:02:40 [2862] [6] INFO: Logging thread6’ to logfile /var/log/kannel/smsc-gsm1.log’ with level0’.
2018-08-27 13:02:40 [2862] [0] INFO: DLR rerouting for smsc id disabled.
2018-08-27 13:02:40 [2862] [0] INFO: Added logfile /var/log/kannel/smsc-gsm2.log’ with level0’.
2018-08-27 13:02:40 [2862] [0] INFO: AT2[gsm2]: configuration shows modemtype
2018-08-27 13:02:40 [2862] [0] DEBUG: AT2[gsm2]: Reading modem definitions from </etc/kannel/kannel.conf>
2018-08-27 13:02:40 [2862] [0] DEBUG: AT2[gsm2]: Found <1> modems in config
2018-08-27 13:02:40 [2862] [0] INFO: AT2[gsm2]: read modem definition for
2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 7 (gw/smsc/smsc_at.c:at2_device_thread)
2018-08-27 13:02:40 [2862] [0] DEBUG: Started thread 8 (gw/bb_smscconn.c:sms_router)
2018-08-27 13:02:40 [2862] [0] INFO: ----------------------------------------
2018-08-27 13:02:40 [2862] [7] DEBUG: Thread 7 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 2862.
2018-08-27 13:02:40 [2862] [0] INFO: Kannel bearerbox II version 1.4.4 starting
2018-08-27 13:02:40 [2862] [7] INFO: Logging thread 7’ to logfile/var/log/kannel/smsc-gsm2.log’ with level `0’.
2018-08-27 13:02:40 [2862] [8] DEBUG: Thread 8 (gw/bb_smscconn.c:sms_router) maps to pid 2862.
2018-08-27 13:02:40 [2862] [0] INFO: Loaded 0 messages from store.
2018-08-27 13:02:40 [2862] [0] INFO: MAIN: Start-up done, entering mainloop
2018-08-27 13:02:40 [2862] [0] DEBUG: AT2[gsm1]: start called
2018-08-27 13:02:40 [2862] [0] DEBUG: AT2[gsm2]: start called
2018-08-27 13:02:41 [2862] [5] INFO: Client connected from <127.0.0.1>
2018-08-27 13:02:41 [2862] [5] DEBUG: Started thread 9 (gw/bb_boxc.c:function)
2018-08-27 13:02:41 [2862] [9] DEBUG: Thread 9 (gw/bb_boxc.c:function) maps to pid 2862.
2018-08-27 13:02:41 [2862] [9] DEBUG: Started thread 10 (gw/bb_boxc.c:boxc_sender)
2018-08-27 13:02:41 [2862] [10] DEBUG: Thread 10 (gw/bb_boxc.c:boxc_sender) maps to pid 2862.
2018-08-27 13:02:41 [2862] [9] DEBUG: boxc_receiver: got boxc_id from <127.0.0.1>

MAPIIIAJI · August 28, 2018, 3:26am

What was done:

After the TON/NPI respectively 5/0 directives were established, I changed the phone number of the modem (my-number) from the SMSC group to character set and it is shows in log file:

2018-08-28 08:00:44 Sent SMS [SMSC:gsm1] [SVC:foo] [ACT:admin] [BINF:] [FID:177] [META:] [from:SMSd] [to:+998935217698] [flags:-1:0:-1:-1:27] [msg:11:asdf @admin] [udh:0:]
2018-08-28 08:00:44 Receive DLR [SMSC:gsm1] [SVC:foo] [ACT:] [BINF:] [FID:177] [META:] [from:SMSd] [to:+998935217698] [flags:-1:-1:-1:-1:8] [msg:4:ACK/] [udh:0:]

In Kannel gateway config in PlaySMS configuration menu, where Additional URL parameter specify next equation from=SMSd;
Change the Default sender ID in PlaySMS main configuration from “1234” to “SMSd”.

All options did not yield results. SMS comes from modem number +99893xxxxxxxx instead, I would like to receive from “SMSd”. Are you have any ideas Steven?

Thanks in advance.

Sincerely,
Jamshid

Steven_Delport · August 28, 2018, 9:18am

As far as I know this can only be achieved if you have a SMSC connection to your upstream provider when using a modem you cannot change the sender ID.

MAPIIIAJI · August 28, 2018, 10:26am

Thanks for answering. Yes, you are right, I have a modem connection. It’s sad that it’s impossible to implement this via a modem. If it’s not difficult, can you give a direction, what are we talking about?
Thank you.

Regards,
Jamshid.

Topic		Replies	Views
Change SMS message header ID Help	8	4185	February 5, 2016
Not able to receive texts from alphanumeric senders Help	4	725	July 20, 2017
How to change Sender ID into my company's name? Help	5	3072	March 21, 2019
Kannel with playsms Help	7	1173	June 20, 2015
Kannel acknowledgment Help	4	1275	May 13, 2016

Need to add the feature "Alpha Tag"s

Related topics